Logistics industry warehouse land selection method: with the continuous progress of social civilization and the rapid development of modern industrial production, logistics and warehousing industry has been unprecedented prosperity, at the same time, with the improvement of the standard of enterprises on product packaging, storage requirements, logistics and warehousing industry on the ground of the warehouse area also put forward higher requirements.

First, the analysis of the traditional ground form

At present, the logistics and warehousing center of the ground is basically ordinary cement concrete ground-based, part of the better conditions of the warehouse using terrazzo or floor tiles, after years of use proved that these floors are different problems.

Ordinary cement concrete floor is generally used above C20 strength, 15 to 20cm thick plain concrete directly polished to do the surface layer, or in the concrete bedding layer and then do 3 to 5cm thick, above C30 strength cement mortar cover layer. This form of ground is the cheapest form of ground, but not the most economical form of ground, generally after two years of use, the role of forklifts in the ground will appear in different degrees of sand, dust phenomenon. With the extension of the use of years, coupled with carbonation, water erosion and weathering, the surface of the ground will continue to chalk, affecting the normal use. Specifically manifested in the stacking of goods regardless of the length of time, it is always covered with dust.

Terrazzo floor and floor tile floor, according to the choice of different materials, the general cost per square meter than the ordinary concrete floor increased by about 30-60 yuan. These two forms of ground in the use of the basic function of the concrete floor to solve the problem of sand and dust, but the surface layer itself and the concrete grass-roots level is stripped, so in the role of heavy vehicles, it is very easy to cause terrazzo or floor tiles surface layer shelling, hollowing, cracking, peeling phenomenon, not only affects the library area of the clean, smooth, and with the use of the damage area will be more and more large, the service life is also very short.

Second, the introduction of new ground forms

For the logistics storage center ground requirements, in fact, the most critical solution is to resist forklift crushing and anti-wheel friction, while trying to improve the ground decorative, durable, beautiful effect. In order to adapt to these requirements, now introduces three kinds of warehouse floor treatment methods for communication and reference.

According to the logistics warehousing center of the new construction or renovation projects, different ground forms can be used. For the new logistics warehousing center, the economic and practical wear-resistant flooring should be considered; for the transformation of the logistics warehousing center, while considering the use of wear-resistant flooring, you can consider epoxy coating flooring and cement floor hardener on the basis of the original ground for treatment.